PREPARATION AND CHARACTERIZATION OF A CipHCl-PLA/PBC/CS COMPOSITE FIBER MEMBRANE FOR ANTIBACTERIAL WOUND DRESSING

Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method

Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...

Modification of Thin Film Composite Nanofiltration Membrane using Silver Nanoparticles: Preparation, Characterization and Antibacterial Performance

This paper reports on preparation of polyamide membrane with addition of silver nanoparticles (AgNPs). AgNPs act as antibacterial agents that are less susceptible to membrane’s biofouling by interfacial polymerization (IP) method. AgNPs was synthesized via green route which has been reported previously. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Field emiss...

modification of thin film composite nanofiltration membrane using silver nanoparticles: preparation, characterization and antibacterial performance

this paper reports on preparation of polyamide membrane with addition of silver nanoparticles (agnps). agnps act as antibacterial agents that are less susceptible to membrane’s biofouling by interfacial polymerization (ip) method. agnps was synthesized via green route which has been reported previously. attenuated total reflectance-fourier transform infrared spectroscopy (atr-ftir), field emiss...

preparation and evaluation of the chitosan composite films containing nitrofurazone as a burn wound dressing material

Preparation and Physical Characterization of Sulfonated Poly (Ether Ether Ketone) and Polypyrrole Composite Membrane

Sulfoanted poly(ether ether ketone) membranes were prepared by the sulfonating agent sulfuric acid. These membranes were modifed by incorporating conducting polymer polypyrrole in order to increase the ionic conductivity and reduce the methanol transmission rate. The modifed composite membranes were then compared on the basis of ionic conductivity, methanol transmission...