Preparation of basalt-based glass ceramics
نویسندگان
چکیده
منابع مشابه
PREPARATION OF Fe/GLASS COMPOSITE BY REDUCTION OF Na2O– Fe2O3–B2O3–SiO2–ZnO GLASS AND GLASS CERAMICS
In the present study, the feasibility of α-Fe ferromagnetic phase formation in glass and glass-ceramic by reduction in hydrogen atmosphere have been investigated. The glass with the composition of 35Na 2 O–24Fe2O3–20B 2O3 – 20SiO 2 –1ZnO (mol %) was melted and quenched by using a twin roller technique. As quenched glass flakes were heat treated in the range of 400-675 °C for 1-2 h in h...
متن کامل-doped chalcogenide glass-ceramics based on selenium
Rare earth doped glass-ceramics transparent in the infrared region up to 16 μm have been prepared and studied. The enhancement of the emission of Er 3+ ions at 1.54 μm with increasing crystallinity was demonstrated in a seleniumbased glass-ceramic having a composition of 80GeSe2-20Ga2Se3+1000 ppm Er. The optical transmission, microstructure and luminescence properties of a base glass and glass-...
متن کاملIron Phosphate Glass-ceramics
The crystallization of 40Fe2O3-60P2O5, 10ZnO-30Fe2O3-60P2O5 and (43.3−x)PbO–(13.7+x)Fe2O3–43P2O5, (0 < x < 30), glasses and glassceramic have been investigated. The structural evolution of glasses during heat treatment at various temperatures and the tendency for crystallization for series of glasses with modified composition are characterized by a dendrite-like phase separation in the early st...
متن کاملMechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites
Influence of the stacking sequences of hybrid composites on the tensile strength, flexural strength, inter-laminar shear strength (ILSS) and impact energy was investigated. The hybrid glass-basalt-carbon/polyester composite laminates were processed by hand lay-up procedure at room temperature. The fracture surface of the composite laminates after the tension and flexural test was examined by sc...
متن کاملCrystallisation of Foturan® glass–ceramics
hotostructurable glass–ceramics are suitable for 3-dimensional microfabrication and, in some instances, can be used as an alternative material o silicon in the microfabrication of micro-electro-mechanical-system (MEMS) devices. Foturan® is a photosensitive lithium–aluminium–silicate lass that can be structured by an exposure to UV light, followed by a thermal treatment and an etching step. In t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Serbian Chemical Society
سال: 2003
ISSN: 0352-5139,1820-7421
DOI: 10.2298/jsc0306505m