Preparation of Carbon Fiber/Carbon Composites Using Intercalated Carbon Fibers
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملThe Resistivity of Carbon Fibers /abs Resin Composites
Polymers filled with conductive particles and fibers have been widely used in electromagnetic interference (EMI) shielding, electrical static discharge (ESD), and other regions. In these combinations, the carbon fibers filled polymer composites are special interest due to their excellent mechanical properties and high conductivity as well as good durability to environmental conditions. However,...
متن کاملReduction of Carbon-Carbon Composites using Bio Antioxidant
In past decades, carbon–carbon composites composed of multidirectional carbon fiber reinforcement embedded in carbon matrix have been significantly explored due to its excellent mechanical and physical properties. Carbon-carbon composites have light weight, high strength at high temperature in non-oxidizing atmospheres, low coefficient of thermal expansion, high electrical conductivity and high...
متن کاملFabrication of activated carbon fibers/carbon aerogels composites by gelation and supercritical drying in isopropanol
Activated carbon fiber/carbon aerogel (ACF/CA) composites were fabricated by gelling a mixture of ACF and resorcinol and furfural, followed by supercritical drying of the mixture in isopropanol. The product then went through carbonization in a nitrogen atmosphere. The fabrication conditions, such as the mass content of R–F, the content of the ACF added, and the gelation temperature, were explor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TANSO
سال: 1992
ISSN: 1884-5495,0371-5345
DOI: 10.7209/tanso.1992.197