Preparation of cellulose nanocrystal (CNCs) reinforced polylactic acid (PLA) bionanocomposites filaments using biobased additives for 3D printing applications
نویسندگان
چکیده
This work presents the experimental steps taken towards preparation of 3D printable bionanocomposites using polylactic acid (PLA) biopolymer containing 0.1, 0.5 and 1 wt% CNCs.
منابع مشابه
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim wileyonlinelibrary.com (1 of 10) 1604619 exiting the nozzle, is challenging. A viscoelastic response with a finite yield stress is required for filament patterning.[3] The shear-induced alignment of anisotropic building blocks, including carbon fibers,[4,5] silicon carbide whiskers,[5] alumina platelets,[3] and nanofibrillated cellulose (NFC)[6]...
متن کاملPolylactic acid (PLA)
This website provides an excellent overview of PLA as a polymer, its properties, and manufacture. This web article describes the production of lactic acid from biomass by microbial fermentation coupled to a poly-merization process to make PLA. The article is a bit dated and its industrial projections are now seen to be a bit over-optimistic. NatureWorks is the company that started large-scale p...
متن کاملBiodegradable Polylactic Acid (PLA) Microstructures for Scaffold Applications
In this research, we present a simple and cost effective soft lithographic process to fabricate PLA scaffolds for tissue engineering. In which, the negative photoresist JSR THB-120N was spun on a glass subtract followed by conventional UV lithographic processes to fabricate the master to cast the PDMS elastomeric mold. A thin poly(vinyl alcohol) (PVA) layer was used as a mode release such that ...
متن کاملBamboo–Polylactic Acid (PLA) Composite Material for Structural Applications
Developing an eco-friendly industry based on green materials, sustainable technologies, and optimum processes with low environmental impact is a general societal goal, but this remains a considerable challenge to achieve. Despite the large number of research on green structural composites, limited investigation into the most appropriate manufacturing methodology to develop a structural material...
متن کاملFrom Cellulose to 3D Objects: 3D printing with a biobased polymer for CO2-neutral manufacturing
In our modern world, eliminating plastics is inconceivable. Unfortunately, they do have disadvantages, including the formation of CO2 in both production and combustion, depletion of fossil feedstocks, and growth of landfills. In the journal Angewandte Chemie, Russian researchers introduce a new way forward, a polymer made entirely from biomass that can easily and inexpensively be used in 3D pri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanoscale advances
سال: 2023
ISSN: ['2516-0230']
DOI: https://doi.org/10.1039/d3na00281k