Preparation of Fine-Grained Silicon-Nitride Ceramics and their Characterization by Depth-Sensing Indentation Tests
نویسندگان
چکیده
منابع مشابه
Preparation and characterization of carbon nanotube reinforced silicon nitride composites
Multiwall carbon nanotube (MWNT) reinforced silicon nitride ceramics matrix composites have been prepared. The hot isostatic press (HIP)-sintering method was used for composite processing. Bending strength and elastic modulus of MWNT-silicon nitride composites showed a considerable improvement compared to matrices with added carbon fiber, carbon black or graphite. However, the silicon nitride s...
متن کاملOrthopedic applications of silicon nitride ceramics.
Silicon nitride (Si(3)N(4)) is a ceramic material developed for industrial applications that demand high strength and fracture resistance under extreme operating conditions. Recently, Si(3)N(4) has been used as an orthopedic biomaterial, to promote bone fusion in spinal surgery and to develop bearings that can improve the wear and longevity of prosthetic hip and knee joints. Si(3)N(4) has been ...
متن کاملPreparation of Ultra Fine Grained Magnesia Ceramics and the Temperature and Porosity Dependence of Their Fracture Behaviour
Fine grain polycrystals of MgO have been prepared from a Mg(OH)2 powder by reactive hot-pressing at 900°C. The densification rate is discussed in terms of superplastic deformation. The bend strength and the effective surface energy for fracture initiation y. have been determined as a function of porosity between room temperature and112000~. A rapid increase in yi with temperature is observed ab...
متن کاملDepth - sensing instrumented indentation with dual sharp
57 A methodology for interpreting instrumented sharp indentation with dual sharp indenters with different tip apex 58 angles is presented by recourse to computational modeling within the context of finite element analysis. The forward 59 problem predicts an indentation response from a given set of elasto-plastic properties, whereas the reverse analysis 60 seeks to extract elasto-plastic propert...
متن کاملPreparation of phase pure, dense fine grained ceramics by conventional and spark plasma sintering of La-substituted BiFeO3 nanoparticles
High density ceramics of the system Bi1-xLaxFeO3, 0 ≤ x ≤ 0.15, have been prepared starting from nanoparticles obtained by mechanosynthesis. The ceramics have been sintered conventionally at 850oC and by spark plasma sintering (SPS). Sintering conditions have been optimized to obtain single phase ceramics, and the microstructure of the ceramics has been compared. Ceramics prepared conventionall...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2015
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.128.b-355