Preparation of hard carbon films by laser PVD method.
نویسندگان
چکیده
منابع مشابه
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولProperties of PVD hard coatings
Last 2 to 3 decades application of PVD (physical vapour deposition) hard coatings exponentially grows. However, the use of hard, thin films in the field of machine elements is the exception rather than the rule. The main problem lies in the relatively high contact pressure and the very complex loading of machine components, which demand a hard resistance surface and a tough core. In seminar it ...
متن کاملEffects of Annealing and Thickness on the Structural and Optical Properties of Crystalline ZnS Thin Films Prepared by PVD Method
Zinc Sulfide (ZnS) thin films were deposited on glass substrates at the pressure of 10-6 mbar by thermal resistor evaporation technique. The effects of annealing on the structural, optical properties of ZnS films were studied. Crystalline ZnS films have been analyzed by X-ray diffraction. Only cubic phase with the preferred (111) plane was found in ZnS films. Optical characteristics were studie...
متن کاملPreparation of Carbon Films by Use of a Glycerin Substrate
While carbon films are highly desirable for supporting specimens for electron microscopy, the difficulty in preparing them prevents their routine use in many laboratories. The usual method employed is to coat the grids with a plastic film which is then coated with carbon in an evaporator, followed by removal of the plastic with a suitable solvent (6). Satisfactorily removing the plastic film wi...
متن کاملFIB Sample Preparation of Polymer Thin Films on Hard Substrates Using the Shadow-FIB Method
Focused ion beam (FIB) instrumentation has proven to be extremely useful for preparing cross-sectional samples for transmission electron microscopy (TEM) investigations. The two most widely used methods involve milling a trench on either side of an electron-transparent window: the “H-bar” and the “lift-out” methods [1]. Although these two methods are very powerful in their versatility and abili...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1990
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.41.572