Preparation of ITO Thin Films by Sol-Gel Method
نویسندگان
چکیده
منابع مشابه
The production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملPhotodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method
In this paper, a modified sol-gel method using peroxotitanic acid sol (PTA) was applied for the preparation of TiO2 nanostructured thin films on glass plates. The peroxotitanic acid sol was synthesized using titanium isopropoxide, isopropylalchol, H2O and hydrogen peroxide. TiO2 films were then calcined at 500oC and characterized by X-ray diffraction ...
متن کاملPhotodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method
In this paper, a modified sol-gel method using peroxotitanic acid sol (PTA) was applied for the preparation of TiO2 nanostructured thin films on glass plates. The peroxotitanic acid sol was synthesized using titanium isopropoxide, isopropylalchol, H2O and hydrogen peroxide. TiO2 films were then calcined at 500oC and characterized by X-ray diffraction ...
متن کاملCharacterization of Ito Thin Films Prepared by Spinning Deposition Starting from a Sol-gel Process
ITO thin films were deposited by spin coating method starting from indium and tin propoxide in the frame of a sol-gel process. Films with the thickness corresponding to 68 nm for one layer deposition were produced and characterized by X-ray diffraction, transmission electron microscopy and infrared reflection spectroscopy. Low conductivity polycrystalline films exhibiting cubical structure (bix...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1994
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.102.200