Preparation of MCrAlY–Al2O3 Composite Coatings with Enhanced Oxidation Resistance through a Novel Powder Manufacturing Process
نویسندگان
چکیده
منابع مشابه
Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملComposite Coatings Employing a Novel Hybrid Powder and Solution-Based Plasma Spray Technique for Tribological Applications
Solution Precursor Plasma Spray (SPPS) technique is an emergent technique which offers significant performance advantages with various functional coatings like YSZ, ZnFe2O4, LSM, metal-doped ZnO, etc. Apart from the above capabilities, efforts towards development of an innovative hybrid approach through simultaneous deposition of powder and solution resulted in coatings with unique microstructu...
متن کاملOxidation Behaviour of Ni-Cr-Y2O3 Composite Coatings Synthesised by Sol Enhanced Pulse Electroplating
The objective of this study was to improve the oxidation resistance of electroplated Ni-Cr coatings by introducing a fine dispersion of yttria (Y2O3) nanoparticles to the coatings. A technique was developed to produce Y2O3 nanoparticles nm in size. Electroplating conditions were also investigated and it was found that pulse plating could produce high quality coatings without cracking. The Y2O3 ...
متن کاملImprovement of Methanol Synthesis Process through a Novel Sorption-Enhanced Fluidized-bed Reactor, Part I: Mathematical Modeling
In the first part of two section paper, a mathematical model of the fluidized bed reactor in the presence of in-situ water adsorbent for methanol synthesis is assessed. The bubbling two-phase regime is applied to model the fluidization concept. The binary adsorbent and catalyst particles system can be separated from each other based on their density difference. The heavy catalyst particles tend...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Spray Technology
سال: 2019
ISSN: 1059-9630,1544-1016
DOI: 10.1007/s11666-019-00830-y