Preparation of microporous glass fiber cloth without cracking
نویسندگان
چکیده
A glass fiber cloth (GFC) with microporosity was prepared upon the suppression of crack generations. After GFC heat-treated, it slowly cooled to room temperature and then subsequently treated hydrochloric acid. The experimental data through complementary techniques including scanning electron microscopy, nitrogen adsorption/desorption isotherm, solid-state 29Si nuclear magnetic resonance spectroscopy, elemental analysis revealed conversion slowly-cooled into a microporous solid no cracks in each alkaline leaching by These results clearly indicated formation without cracking.
منابع مشابه
Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method
Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...
متن کاملA simplified numerical simulation method of bending properties for glass fiber cloth reinforced denture base resin.
The purpose of this study was to propose a new numerical modeling of the glass fiber cloth reinforced denture base resin (GFRP). The proposed model is constructed with an isotropic shell, beam and orthotropic shell elements representing the outmost resin, interlaminar resin and glass fiber cloth, respectively. The proposed model was applied to the failure progress analysis under three-point ben...
متن کاملIntracanal Retention of Glass Fiber Posts
Objective: Fiber-reinforced composite (FRC) posts have recently become more popular for restoring endodontically treated teeth because of providing esthetics, better stress distribution and lower risk of root fracture. Resistance against tensile forces dislodging the post from the root canal is a prerequisite for these posts. This study aimed to evaluate the tensile retention (strength) of in...
متن کاملModifying glass fiber surface with grafting acrylamide by UV-grafting copolymerization for preparation of glass fiber reinforced PVDF composite membrane.
Experimental design and response surface methodology (RSM) were used to optimize the modification of conditions for glass surface grafting with acrylamide (AM) monomer for preparation of a glass fiber reinforced poly(vinylidene fluoride) (PVDF) composite membrane (GFRP-CM). The factors considered for experimental design were the UV (ultraviolet)-irradiation time, the concentrations of the initi...
متن کاملAngle-independent VO2 Thin Film on Glass Fiber Cloth as a Soft-Smart-Mirror (SSM)
Designing materials with a negative feedback function is beneficial for achieving temperature regulation inside a greenhouse. VO2 has been studied extensively because of its low insulator-to-metal transition temperature (IMT). In this study, reflection changes during a VO2 phase transition were investigated. Glass fiber cloth was used as a substrate, as it is stable and soft. A VO2 thin film on...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2021
ISSN: ['1882-0743', '1348-6535']
DOI: https://doi.org/10.2109/jcersj2.21031