Preparation of Mullite Fiber by Sol-Gel Method
نویسندگان
چکیده
منابع مشابه
Preparation of Silica by Sol-Gel Method Using Formamide
In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolith...
متن کاملPreparation and investigation of magnetic properties of Manganese Cadmium ferrite nanoparticles by Sol-gel method
In the present investigation, manganese ferrite nanoparticles substituted by cadmium with Mn1-xCdxFe2O4 composition and substituted amount x=(0, 0.1, 0.3, 0.5) were prepared by Sol-gel method. Pattern analysis of X-ray diffraction (XRD) confirmed ferrite single phase structure in all samples. The average crystal size was estimated from 17 to 22 nm. The chemical bonds and ferrite formation phase...
متن کاملElectrospun mullite fibers from the sol–gel precursor
Mullite fibers with diameters from 400 nm to 10 lm were fabricated from the sol–gel precursors using the electrospinning method. During the precursor synthesis, the hydrolysis was controlled to obtain highly viscous mullite sols. The viscous mullite sols were then diluted and mixed with a small amount of polyethylene oxide. Controlling the precursor rheology and spinning conditions, we obtained...
متن کاملPREPARATION AND CHARACTERIZATION OF TiO2 Fe2O3 NANOCOMPOSITE BY SOL GEL METHOD
Nanocomposites have improved aspect ratio and better mechanical properties when compared to the composites which had structures less than 100nm They are 1000 times tougher compared to conventional composites. Besides mechanical properties, nanocomposites also have improved electrical conductivity, thermal stability, chemically resistant, flame retardant and low permeability. TiO2 finds its best...
متن کاملPreparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method
In this study, TiO2 nanoparticles have been synthesized by sol-gel method. Then, the effects of the different pHs, stirring times, surfactants (CTAB and Span 20) and temperatures on TiO2 nanoparticles were studied. The X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), and transmission electron microscopy (TEM) analyses were used to characterize the samples. The obs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1991
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.99.654