Preparation of Nickel Oxide Films by Sol-Gel Process
نویسندگان
چکیده
منابع مشابه
Preparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
Tungsten trioxide (WO3) films have been coated on indium thin oxide (ITO) conductive glass substrate, using aqueous solution of peroxotungstic acid (PTA) by the sol-gel dip coating method. X-ray diffractometery (XRD) analysis confirmed monoclinic and triclinic structure for the film and powdered WO3 respectively. Fourier transforms infrared spectroscopy (FT-IR) exhibit...
متن کاملSol-gel Preparation of Zirconium Oxide
INTRODUCTION A sol-gel preparation involves f m t the formation of a sol, which is a suspension of solid particles in a liquid, then of a gel, which is a diphasic material with a solid encapsulating a liquid. The liquid can be removed from a gel by either conventional drying (such as by using an oven) to obtain a plojiict kLown as e xercgel, or hy drying with supercritical extraction (often ref...
متن کاملpreparation and characterization of wo3 electrochromic films obtained by the sol-gel process
tungsten trioxide (wo3) films have been coated on indium thin oxide (ito) conductive glass substrate, using aqueous solution of peroxotungstic acid (pta) by the sol-gel dip coating method. x-ray diffractometery (xrd) analysis confirmed monoclinic and triclinic structure for the film and powdered wo3 respectively. fourier transforms infrared spectroscopy (ft-ir) exhibited the structure of peroxo...
متن کاملPreparation and luminescent properties of Eu- doped BaTiO3 thin films by sol–gel process
Eu-doped BaTiO3 thin films with a pseudo-cubic perovskite structure were successfully fabricated on magnesia substrates at low temperature by using a high-concentration sol–gel process, in which the newly developed gel-aging process on substrate was employed. Film microstructure, crystallinity, sintering properties and photoluminescence (PL) were investigated. The xerogel thin films exhibited s...
متن کاملPreparation of (Pb,Ba)TiO3 powders and highly oriented thin films by a sol-gel process
Solid solution Pb1-xBaxTiO3, with particular emphasis on Pb0.5Ba0.5TiO3, was prepared using a sol-gel process incorporating lead acetate trihydrate, barium acetate, and titanium isopropoxide as precursors, acetylacetone (2,4 pentanedione) as a chelating agent, and ethylene glycol as a solvent. The synthesis procedure was optimized by systematically varying acetylacetone: Ti and H2O:Ti molar rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1993
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.101.227