Preparation of Paving Asphalt by Co-pyrolysis of Coal Tar Pitch and FCC Slurry
نویسندگان
چکیده
منابع مشابه
Improving the Yield and Quality of Tar during Co-pyrolysis of Coal and Cotton Stalk
Co-pyrolysis of Shenmu coal (SM) and cotton stalk (CS) at different blend ratios were carried out in a tubular furnace. The pyrolysis temperature was up to 600 °C at 5 °C/min and kept for 15 min. The results indicated that there was an interactive effect between SM and CS, which increased the tar yield. Moreover, the content of light components in co-pyrolysis tar from all CS/SM blend ratios wa...
متن کاملPreparation of coal slurry with organic solvents.
In this study, various organic solvents were used to prepare coal slurries and the rheological and thermal properties of coal-organic solvent slurries were examined. Solvents with molecules containing unpaired electrons (high basicity) show high extraction power and cause swelling of coal. Therefore, coal-organic solvent slurries usually showed higher viscosities compared to coal-water slurry. ...
متن کاملPreparation of coal slurry with 2-propanol.
This study explored the feasibility of using waste organic solvents as substitutes for water to prepare coal slurries. The rheological properties of coal-2-propanol slurries were examined and compared with that of coal-water slurry (CWS). The good compatibility between coal particles and 2-propanol resulted in stable particle suspension in slurry which usually exhibit Newtonian behaviour. Howev...
متن کاملUltrafine Particles: Geiser et al. Respond
The National Institute for Occupational Safety and Health (NIOSH) has a partnership relationship with the asphalt paving and roofing industries and their associated unions. Our partners saw in the EHP Focus article “Paving Paradise: The Peril of Impervious Surfaces” (Frazer 2005) the statement on page A459: “Asphalt is one concern, as it contains coal tar pitch, a recognized human carcinogen .....
متن کاملThe asphalt paving process
Language: English The Challenge At the outset the asphalt paving process seems to be simple. Trucks deliver hot mix asphalt from plants to the construction site. There the asphalt is loaded on asphalt pavers that evenly spread the asphalt. Finally, compactors compact the asphalt to its required density. Despite this relatively structured process our research shows that there are significant dis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Engineering and Technology Research
سال: 2017
ISSN: 2475-885X
DOI: 10.12783/dtetr/icaenm2017/7806