Preparation of Polyimide-Silica Hybrid Films Using Sol-Gel Process.
نویسندگان
چکیده
منابع مشابه
Preparation of Silica by Sol-Gel Method Using Formamide
In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolith...
متن کاملNew Sol-Gel Solution with 45 Days Stability for Preparation Silica Thin Films
As we know sol-gel is one of the most important techniques for thin film preparation. In this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. The prepared sol was stable for 45 days which is very important to characterize the coating process. The optical properties as a function of aging time, withdrawal rate, and he...
متن کاملPreparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
Tungsten trioxide (WO3) films have been coated on indium thin oxide (ITO) conductive glass substrate, using aqueous solution of peroxotungstic acid (PTA) by the sol-gel dip coating method. X-ray diffractometery (XRD) analysis confirmed monoclinic and triclinic structure for the film and powdered WO3 respectively. Fourier transforms infrared spectroscopy (FT-IR) exhibit...
متن کاملPreparation and electrochemical study of cerium–silica sol–gel thin films
Design and development of suitable multilayered systems for delaying corrosion advance in metals requires that both the alteration mechanisms of the metal and the behaviour and properties of the protective coatings be known. Coatings prepared by the sol–gel method provide a good approach as protective layers on metallic surfaces. This kind of coatings can be prepared from pure chemical reagents...
متن کاملDoped Sol-Gel Films for Silica-on-Silicon Photonic Components
Further expansion of optical communication systems depends strongly on the development of cheap component technologies for functions such as switching, demultiplexing and amplification. Silica-on-silicon is increasingly recognised as the best approach to low cost integrated optics for such applications, but so far the functionality is limited. The purpose of NODES, a basic research collaboratio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 1992
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.5.393