Preparation of Porous KNbO<sub>3</sub> Ceramics by Solvothermal Solidification Method
نویسندگان
چکیده
منابع مشابه
Preparation of Higly Porous Hydroxyapatite Ceramics from Cuttlefish Bone
Abstract: Hydroxyapatite, Ca10(PO4)6(OH)2, has been widely investigated for medical purposes because it is suitable for either direct clinical use as implants or tissue-engineering applications. In this work materials were successfully produced via hydrothermal transformation of aragonite, obtained from fresh cuttlefish bones, at 200°C and high pressures. Beyond low production cost, worldwide a...
متن کاملPreparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution
Zeolite were formed through agar gelcasting method.Response surface methodology ( RSM ) is proposed as a tool for rapidly optimizing the activation parameters in order to obtain the highest porosity of samples. 40 % of zeolite and 1 wt % of agar was selected as optimal conditions. porous bodies with an optimal combination of 54.4% porosity , density 0.9 g / cm3 , and compressive strength of 6....
متن کاملResearch about the Porous Ceramics of Al2O3-TiB2 System by SHS Method
Porous ceramics composite was prepared with mixed powders (Al, TiO2 and B2O3) by SHS (Self-propagating High-temperature Synthesis) method. The effects of the particle size of aluminum power, the additives of SiC and the compacting pressure on the product properties and the pore size, as well as the combustion process in the Al2O3-TiB2 system were researched. The effects of all factors on proper...
متن کاملAC Microdischarges in Porous Ceramics
Generation of microdischarges inside porous ceramics by AC high voltage has been investigated. Electrical and optical measurements were performed to explore the physical properties of the microdischarges. The effect of pore size, discharge power and gas mixture on the discharge properties and development is described. Introduction Research of various types of non-thermal plasmas generated by el...
متن کاملInspired by Abalone Shell: Strengthening of Porous Ceramics with Polymers
INTRODUCTION Alumina ceramics have long been of technological importance. However, their brittleness limits their potential for use in structural applications. Traditional approaches proposed to improve the strength and reliability of ceramics include: decrease flaw size, improve fracture toughness and flaw insensitivity, and decrease applied stresses. Polymers on the other hand, although weak,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Materials Research Society of Japan
سال: 2015
ISSN: 1382-3469,2188-1650
DOI: 10.14723/tmrsj.40.305