Preparation of Porous Mullite Ceramics by Leaching Method
نویسندگان
چکیده
منابع مشابه
Mullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملPreparation of Silver- and Zinc-Doped Mullite-Based Ceramics Showing Anti-Bacterial Biofilm Properties
Zincand silver-doped mullite ceramic discs were prepared and tested as potentially resistant materials against bacterial adhesion and biofilm formation. Elemental analysis and X-ray diffraction studies showed that zinc ions were incorporated in the structural framework of the mullite, while silver ions remained outside the mullite crystal lattice, which allowed their slow (0.02 ppm/24 hours) le...
متن کاملPreparation of Higly Porous Hydroxyapatite Ceramics from Cuttlefish Bone
Abstract: Hydroxyapatite, Ca10(PO4)6(OH)2, has been widely investigated for medical purposes because it is suitable for either direct clinical use as implants or tissue-engineering applications. In this work materials were successfully produced via hydrothermal transformation of aragonite, obtained from fresh cuttlefish bones, at 200°C and high pressures. Beyond low production cost, worldwide a...
متن کاملPreparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution
Zeolite were formed through agar gelcasting method.Response surface methodology ( RSM ) is proposed as a tool for rapidly optimizing the activation parameters in order to obtain the highest porosity of samples. 40 % of zeolite and 1 wt % of agar was selected as optimal conditions. porous bodies with an optimal combination of 54.4% porosity , density 0.9 g / cm3 , and compressive strength of 6....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 1989
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.97.604