Preparation of silver/reduced graphene oxide coated polyester fabric for electromagnetic interference shielding
نویسندگان
چکیده
منابع مشابه
Barium ferrite decorated reduced graphene oxide nanocomposite for effective electromagnetic interference shielding.
There is an increased interest in the development of high performance microwave shielding materials against electromagnetic pollution in recent years. Barium ferrite decorated reduced graphene oxide (BaFe12O19@RGO) nanocomposite was synthesized by a high energy ball milling technique and its electromagnetic properties were investigated in the frequency range of 12.4-18 GHz (Ku band). The result...
متن کاملInfluence of fabric density on shielding effectiveness of electromagnetic shielding fabric
In this paper, fabric density influence on the shielding effectiveness of electromagnetic shielding fabric is studied. A series of blended shielding fabrics are tested using a waveguide tube testing method to obtain the shielding effectiveness with different density. Experimental results show that the shielding effectiveness increases with the increase of fabric density, and there are two rapid...
متن کاملComposite Materials for Electromagnetic Interference Shielding
This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...
متن کاملFacile hydrothermal preparation of graphene oxide nanoribbons from graphene oxide.
Graphene oxide nanoribbons (GONR) with regular edges have been prepared by a facile hydrothermal method. The relatively high yield and convenient preparation of GONR eventually make graphene nanoribbons (GNR) accessible in the field of composite materials where bulk quantities of nanoribbons are required.
متن کاملSericin based bioactive coating for polyester fabric
In this study, a process has been developed for durable coating of sericin on polyester. Pre modification of polyester with alkali (sodium hydroxide) has been carried out to incorporate polar entities on its inert surface. 10g/L of sericin with 30mL/L of glutaraldehyde, cured at 130°C for 2min has been optimized for its application on modified surface. Treated samples are tested for surface smo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2017
ISSN: 2046-2069
DOI: 10.1039/c7ra07863c