Preparation of Sulfur-impregnated Carbonaceous Adsorbent Using Mechanochemical Treatment
نویسندگان
چکیده
منابع مشابه
Preparation of Sulfur Mortar from Modified Sulfur
Mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. Molten sulfur reacted with olefinic additive, at 130-140 ºC, and then mixed with preheated filler and aggregates. Sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 5...
متن کاملSulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries.
The commercialization of lithium-sulfur batteries is hindered by low cycle stability and low efficiency, which are induced by sulfur active material loss and polysulfide shuttle reaction through dissolution into electrolyte. In this study, sulfur-impregnated disordered carbon nanotubes are synthesized as cathode material for the lithium-sulfur battery. The obtained sulfur-carbon tube cathodes d...
متن کاملAdsorption and Desorption of Sulfur Compounds by Improved Nano Adsorbent: Optimization Using Response Surface Methodology
Today, sulfur removal from fuels has improved by new adsorbents such as zeolites that needs extensive studies. This study investigates the feasibility of sulfur compounds adsorption on improved nano zeolite existing in organic fuels and desorption of them from nano-adsorbent.Some properties of improved nano zeolite were analyzed to receive better sulfur compounds adsorption.<e...
متن کاملTextile Wastewater Treatment Using Sawdust as Adsorbent
The role of sawdust in the removal of pollutants from textile wastewater has been investigated. The textile wastewater was treated by using sawdust as adsorbent and then filtered. The various physicochemical characteristics of sawdust treated and untreated textile effluent were analyzed. The maximum percent removal of 37% was observed for total suspended solids while minimum removal of 9% for c...
متن کاملLeaching Behavior and Risk Control of Waste Mercury Chloride Catalyst Through Mechanochemical Reaction Using Sulfur
A large volume of waste mercury chloride catalyst (HgCl2) is generated by calcium carbide-based polyvinyl chloride production in China, which accounts for 30% of global mercury consumption. However, there are few studies on the leaching behavior and risk control of waste catalyst where mercury is in the form of HgCl2, which is more soluble than metal mercury and poses great threat to human heal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hosokawa Powder Technology Foundation ANNUAL REPORT
سال: 2021
ISSN: 2189-4663
DOI: 10.14356/hptf.18117