Preparation of Ultrafine SiC Powders by the Plasma CVD under Reduced Pressure
نویسندگان
چکیده
منابع مشابه
Preparation of Ultrafine CVD WC Powders Deposited from WCl6 Gas Mixtures
Ultrafiie WC powders were produced from WCla-C3Hs-H2 gas mixtures in a conventional tubular hot-wall downstream CVD reactor. At reaction temperatures between 1100 and 1550°C powders containing W, WZC, WC and carbon were produced. The overall chemical compositions of the tungsten coinpounds as well as the free carbon contents depended strongly on the reaction temperature and the ratio of the rea...
متن کاملLow-pressure CVD and Plasma- Enhanced CVD
LPCVD is a process used in the manufacturing of the deposition of thin films on semiconductors usually ranging from a few nanometers to many micrometers. LPCVD is used to deposit a wide range of possible film compositions with good conformal step coverage. These films include a variety of materials including polysilicon for gate contacts, thick oxides used for isolation, doped oxides for global...
متن کاملFluorinated SiC CVD
For the emerging semiconductor material silicon carbide (SiC) used in high power devices, chemical vapor deposition (CVD) is the most prominent method to create the electrically active SiC epitaxial layers in the device. The process of growing such epitaxial layers is to use a hydrocarbon and silane diluted in hydrogen flow through a hot chamber where chemical reactions take place in such a man...
متن کاملPreparation of epitaxial PbTiO 3 thin films by metalorganic vapor phase epitaxy under reduced pressure
In this study PbTiO 3 thin films were deposited using metalorganic vapor phase epitaxy (MOVPE). Titanium-isopropoxide and tetraethyl-lead were used as the Ti and Pb precursors, and 0 2 was the oxidizing gas. A wide range of conditions for preparing high quality PbTiO 3 thin film were investigated. The epitaxial PbTiO 3 thin films were grown on (001) SrTiO 3 substrates at a growth temperature of...
متن کاملPreparation of carbon nanotubes by DC arc discharge process under reduced pressure in an air atmosphere
Carbon nanotubes (CNTs) were grown using a DC arc discharge process in an air atmosphere and relevant process parameters were investigated. ithout using an inert gas, multi walled carbon nanotubes could be synthesized in the deposit area of the cathode even in an air atmosphere, but ingle walled carbon nanotubes were not detected in the soot area despite using the same process conditions as in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1985
ISSN: 1884-2127,0009-0255
DOI: 10.2109/jcersj1950.93.1081_511