Preparation of Zeolite Films Using Electrophoretic Deposition Method.

Preparation of Zsm-5 Zeolite Membranes by Combined Hydrothermal Synthesis and Electrophoretic Deposition

Electrophoretic Deposition of Hydroxyapatite

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

Preparation of Nanohydroxyapatite-Carbon Nanotube Composite Coatings on 316L Stainless Steel Using Electrophoretic Deposition

Nanohydroxyapatite-carbon nanotube composite coatings were deposited via electrophoretic deposition (EPD). AISI 316L stainless steel and ethanol were used as substrate and dispersing medium, respectively. 5%wt carbon nanotube (CNT) was used as reinforcing phase. Uniform and macrocrack-free coatings were obtained both for hydroxyapatite (HA) and HA-5%wt CNT coatings. Scanning electron micros...

GaAs Surface Preparation for Thin Films Deposition Using Sodium Hypochlorite

Preparation of Gallium Arsenide (GaAs) surfaces, prior to a thin-film deposition, serves the prevailing functions of lowering defectivity, contamination removal and promoting adhesion. When native oxides, metallics or particulates are a concern, the common GaAs clean includes a dilute acid (HCl, HF) or base (NH4OH). When adhesion is the primary concern, the GaAs surface may need to be roughened...

Sacrificial layer electrophoretic deposition of free-standing multilayered nanoparticle films.

Sacrificial layer electrophoretic deposition (SLED) is a technique to assemble nanoparticles that yields free-standing, multilayered nanoparticle films with macroscopic lateral dimensions after the sacrificial layer is dissolved.