Pressure Balance Characteristic of a Double Structure Blade under Quasi-Statically Reciprocal Loading Condition
نویسندگان
چکیده
منابع مشابه
Crack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading
In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...
متن کاملSoil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions
The safety of lifelines, as the most important urban facilities, under different conditions highly depends on the safe design and performance of these buried structures. This cannot be achieved unless their actual behaviors are well understood and considered at the designing stage. A new physical model was developed in Amirkabir University of Technology to study the behavior of buried pipes und...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Double-Lap Joints under Quasi-static Loading using XFEM
The current paper is concerned with modelling damage and fracture in woven fabric composite double-lap bolted joints that fail by net-tension. A 3-D finite element model is used, which incorporates bolt clamp-up, to model a range of CFRP bolted joints, which were also tested experimentally. The effects of laminate lay-up, joint geometry, hole size and bolt clamp-up torque were considered. An Ex...
متن کاملDynamic Response of a Composite Propeller Blade Subjected to Shock and Bubble Pressure Loading
The interaction between an underwater explosion and a composite propeller involves several physical phenomena that an accurate numerical simulation needs to capture. These include proper description of the initial explosion shock wave, of its propagation in the water, and of its interaction with the propeller blades and any other neighboring boundaries. In this work, a numerical procedure which...
متن کاملFailure Test and Finite Element Simulation of a Large Wind Turbine Composite Blade under Static Loading
This study presented a failure analysis of a 52.3 m composite wind turbine blade under static loading. Complex failure characteristics exhibited at the transition region of the blade were thoroughly examined and typical failure modes were indentified. In order to predict multiple failure modes observed in the tests and gain more insights into the failure mechanisms of the blade, a Finite Elemen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid Mechanics and Materials Engineering
سال: 2008
ISSN: 1880-9871
DOI: 10.1299/jmmp.2.1253