Pressure loss at bent section in air conveying pipe.
نویسندگان
چکیده
منابع مشابه
Dilute-phase Pneumatic Conveying of Polystyrene Particles: Pressure Drop Curve and Particle Distribution over the Pipe Cross-section
During the pneumatic conveying of plastic pellets, it has been observed that materials with similar physical characteristics may develop a substantial difference in pressure drop. In this work, the pressure drop in a particle-laden 2.7 meter long horizontal channel with circular cross-section is presented from an experimental perspective. Experiments are carried out for cylindrical polystyrene ...
متن کاملAn Experimental Correlation for Friction Factor in Horizontal Pipe with Trapezoidal Section Inner Longitudinal Slots for Conveying of Solids
In order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. The test rig has longitudinal trapezoidal slots in its conveying pipes. Through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and Froude number is presented. It is shown that the mixture friction factor for pipes with inn...
متن کاملStress Diagnosis Method Based on the Section Flatness of a Bent Pipe
If ground subsidence or seismic load acts on piping that includes bent pipes, the highest stress often occurs not in a straight section but in a bent section. The author has therefore developed a method of estimating the stress generated by a change in diameter by adding an equation for the diameter change and bending moment to the bent pipe stress calculation equations proposed by Rodabaugh an...
متن کاملOn stability of a clamped-pinned pipe conveying fluid
In the past, stability of an undamped clamped-pinned pipe conveying fluid has been always considered numerically leading to controversial results. Païdoussis (2004) has shown that a numerical stability analysis of a clamped-pinned pipe requires exceptionally large number of vibration modes to obtain the correct dynamical behaviour. In this paper, analytical proof of stability of a clamped-pinne...
متن کاملan experimental correlation for friction factor in horizontal pipe with trapezoidal section inner longitudinal slots for conveying of solids
in order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. the test rig has longitudinal trapezoidal slots in its conveying pipes. through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and froude number is presented. it is shown that the mixture friction factor for pipes with inner t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Powder Technology, Japan
سال: 1986
ISSN: 0386-6157,1883-7239
DOI: 10.4164/sptj.23.592