Printed photodetectors
نویسندگان
چکیده
منابع مشابه
Biocompatible, large-format, inkjet printed heterostructure MoS2-graphene photodetectors on conformable substrates
An inkjet printed, biocompatible, heterostructure photodetector is described that was constructed using inks of photo-active molybdenum disulfide (MoS2) and electrically conducting graphene which facilitated charge collection of the photocarriers. The importance of such devices stems from their potential utility in age-related-macular degeneration, which is a condition where the photosensitive ...
متن کاملNanowire photodetectors.
The use of nanowires and nanowire structures as photodetectors is an emerging research topic. Despite the large amount of reports on nanowire photoresponse that appeared in the literature over the last decade, the mechanism leading to high photosensitivity and photoconductive gain in high aspect ratio nanostructures has been elucidated only recently. Novel device architectures integrated in sin...
متن کاملCMOS Photodetectors
The inclusion of cameras in everything from cell phones to pens to children’s’ toys is possible because of the low cost and low power consumption of the imaging arrays that form the core of the cameras. However, these arrays are low cost and low power because they are CMOS-based; this allows for the devices to be made with the same processes and facilities that are used to make memory and compu...
متن کاملAlN avalanche photodetectors
Deep ultraviolet DUV avalanche photodetectors APDs based on an AlN /n-SiC Schottky diode structure have been demonstrated. The device with a mesa diameter of 100 m exhibits a gain of 1200 at a reverse bias voltage of −250 V or a field of about 3 MV /cm. The cut-off and peak responsivity wavelengths of these APDs were 210 and 200 nm, respectively. This is the highest optical gain and shortest cu...
متن کاملScalable silicon nanowire photodetectors
This paper presents photodetectors having vertically stacked electrodes with sub-micron ( 300 nm) separation based on silicon nanowire (SiNW) nanocomposites. The thin-film-like devices are made using standard photolithography instead of electron beam lithography and thus are amenable to scalable low-cost manufacturing. The processing technique is not limited to SiNWs and can be extended to diff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Semiconductor Science and Technology
سال: 2015
ISSN: 0268-1242,1361-6641
DOI: 10.1088/0268-1242/30/10/104006