Printing Durability of Electroformed Ni-Co Alloy Mesh for Screen Printing
نویسندگان
چکیده
منابع مشابه
Liquid alloy printing of microfluidic stretchable electronics.
Recently, microfluidic stretchable electronics has attracted great interest from academia since conductive liquids allow for larger cross-sections when stretched and hence low resistance at longer lengths. However, as a serial process it has suffered from low throughput, and a parallel processing technology is needed for more complex systems and production at low costs. In this work, we demonst...
متن کاملScreen Printing Process Design of Experiments for Fine Line Printing of Thick Film Ceramic Substrates
Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still co...
متن کاملFormaldehyde as Screen Printing Indoor Pollutant
The presence of formaldehyde in indoor air samples has been detected in five screen printing facilities of Novi Sad, Serbia. Air was sampled five times during one working week for each screen printing facility. The sampling was conducted continuously during 4 hours. The concentrations of formaldehyde were determined by UV-VIS spectrometry at 580 nm. The average concentrations of formaldehyde we...
متن کاملPrecise Position Detection of a Mesh-Backed Printing Screen Based on the Smallest Enclosing Circle Detection
In this paper we describe a new method of position detection for a mesh-backed printing screen with an alignment mark that is overlapped by mesh patterns. A circular hole is selected as an alignment mark so that at least a portion of its contour can be observed through the windows of the mesh wires. To recognize the true contour, the smallest circle enclosing binary patterns acquired with a tra...
متن کاملRapid Manufacturing of Co-Cr-Mo Implants by Three-Dimentional Printing Process for Orthopedic Applications
The fabrication of complex-shaped parts out of (wt %) Co-28Cr-6Mo alloy by three-dimensional printing (3DP) was studied using two grades of the alloy with average particle sizes of 20 and 75 μm. To produce sound specimens, 3DP processing parameters were tuned. The sintering behavior of the powders was characterized by the dilatometric analysis. Batch sintering in argon atmosphere at 1280 °...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Electronics Packaging
سال: 2007
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.10.491