Prior Austenite Grain Boundary Detection in an Ultra-Cleaned Cr Bearing Microalloyed Steel
نویسندگان
چکیده
منابع مشابه
Isothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملMODELLING OF KINETICS OF AUSTENITE-TO-ALLOTRIOMORPHIC FERRITE TRANSFORMATION IN 0.37C–1.45Mn–0.11V MICROALLOYED STEEL
The present paper is concerned to the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austenite-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, wh...
متن کاملRelevant Aspects of the Allotriomorphic and Idiomorphic Ferrite Transformations Kinetics
Recently, the grain boundary−intragranular nucleation of ferrite has received great attention seeking for the improvement of the toughness in the steel, specially when conventional austenite grain refinement techniques are not enough. This paper deals with some relevant aspects about the competitive process of allotriomorphic and idiomorphic ferrite transformations in a medium carbon vanadium-t...
متن کاملMetallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels
Different techniques have been investigated to seek the best procedure to reveal the prior-austenite grain boundaries in three medium-carbon microalloyed steels. This study has been carried out over a wide range of temperatures (950–1250 C) and it has been found that thermal etching (TE) is the best technique to reveal the prior-austenite grain boundaries in these steels. D 2001 Elsevier Scienc...
متن کاملInfluence of Boron on Initial Austenite Grain Size and Hot Deformation Behavior of Boron Microalloyed Steels
The initial austenite grain size of boron microalloyed steel with three different amounts of boron (20, 40, and 60 ppm) was investigated under different heating temperatures (1150, 1100, and 1050 °C), and hot compression tests of samples in a wide range of temperature (900–1100 °C) and strain rate (0.1–10 s−1) were conducted. It was found that the initial austenite grain size increases with inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2018
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2017-485