Procedure for Setting up 180 Degree Sharp Bend Flume Including Construction and Examinations With Hydraulic Structures
نویسندگان
چکیده
منابع مشابه
اثر شرایط جریان و عوامل هندسی آبشکن مستغرق در پایداری ریپ‌رپ
Spur dikes are the most common hydraulic structures for river bank protection. Since the construction of this structure causes higher velocities around it, this structure is exposed to erosion. Riprap around the structure nose is one of the most common and economic way to protect spur dike. The main aim of this study is to investigate the riprap stability in a mild 90 degrees bend. Experiments ...
متن کاملExperimental Study of the Effect of Base-level fall at the Beginning of the Bend on Reduction of Scour around a Rectangular Bridge Pier Located in the 180 Degree Sharp Bend
Base-level fall in river beds occurs due to varying natural or unnatural causes. Base-level fall causes the change in the behavior of flow at the location of drop in base-level. In such situations, most of scour occur at the foot of the slope, and slope wall retreats in the upstream direction. This phenomenon widens the wall of the river bank, thus leading to its destruction. The amount of bed ...
متن کاملCFD Model Validation and Prediction of Mist/Steam Cooling in a 180-Degree Bend Tubes
To achieve higher efficiency target of the advanced turbine systems, the closed-loop steam cooling scheme is employed to cool the airfoil. It is proven from the experimental results at laboratory working conditions that injecting mist into steam can significantly augment the heat transfer in the turbine blades with several fundamental studies. The mist cooling technique has to be tested at gas ...
متن کاملبررسی آزمایشگاهی اثر موقعیت تک آبشکن بر عمق آبشستگی اطراف آن در خم180 درجه
In order to study the effect of spur dike position in the bend on the process of scoring, some tests were done in a laboratory flume of Plax glass material with 180 deg bend and R/B=4/7. In this research, by setting an spur dike in the laboratory flume with positions of 30,60,90,120,150and 160 degrees, discharge rates of 20 ,24 and 28 Lit/s , and fixed depth of 13 cm, the process of scoring aro...
متن کاملStudy of Streamlines under the Influence of Displacement of Submerged Vanes in Channel Width, and at the Upstream Area of a Cylindrical Bridge Pier in a 180 Degree Sharp Bend
In this paper, submerged vanes were placed at the upstream area of a bridge pier located at the 90 degree angle. Then, using the laboratory equipment, a study of flow pattern was conducted throughout the bend, specifically around the pier and submerged vanes. ADV velocimeter was incorporated in order to help measure 3D velocity components. Submerged vanes were installed at distances of 40 and 6...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientia Iranica
سال: 2018
ISSN: 2345-3605
DOI: 10.24200/sci.2018.5033.1054