Process Parameter Optimization of Detonation Gun Coating for Various Coating Materials

A Quality by Design Approach for Coating Process Parameter Optimization

Film coating is an essential unit operation in tablet manufacturing. Most tablet dosage forms in the market are film coated. The main purpose for coating of immediate release film dosage form is to provide colour identification, to enhance the stability, taste masking. It is also noted that film coating can improve the processibility and handling during pharmaceutical manufacturing and is the m...

Coating Materials

Corrosion Behavior of Detonation Gun Sprayed Fe-Al Type Intermetallic Coating

The detonation gun sprayed Fe-Al type coatings as an alternative for austenitic valve steel, were investigated using two different methods of testing corrosion resistance. High temperature, 10-hour isothermal oxidation experiments at 550, 750, 950 and 1100 °C show differences in the oxidation behavior of Fe-Al type coatings under air atmosphere. The oxide layer ensures satisfying oxidation resi...

Roughness Model for Adhesion Testing of Pharmaceutical Coating Materials

Objective Roughness is the main parameter in interlocking bonding mechanism. Yet there is no model designed to evaluate the effect of surface roughness on adhesion of coating materials in pharmaceutical sciences. Materials and Methods In this study polymethyl metacrylate spherical beads with different sizes were poured into 10 mm mold, then it was pressed by hand screw and finally heated to 141...

An Optimization Of Spray Coating Process To Minimize Coating Material Consumption

In cookware industry, interior spray coating process is an important process to protect the cookware product from the corrosion. In this process, the coating material “TEFLON” is used to spray to cover all the part’s surface. If a pot or pan is not too deep, one spray gun is enough to spray to cover all the interior surface. However, for the high side-wall pot, two spray guns must be used to sp...