Processing of Porous Cordierite Ceramics with Controlled Porosity
نویسندگان
چکیده
منابع مشابه
Processing and characterization of porous Ti2AlC with controlled porosity and pore size
In this work, we demonstrate a simple and inexpensive way to fabricate porous Ti2AlC, one of the best studied materials from the MAX phase family, with controlled porosity and pore size. This was achieved by using NaCl as the pore former, which was dissolved after cold pressing but before pressureless sintering at 1400 C. Porous Ti2AlC samples with a volume fraction of porosity ranging from 10 ...
متن کاملGradient-Hierarchic-Aligned Porosity SiOC Ceramics
This work describes a simple technique to produce porous ceramics with aligned porosity having very high permeability and specific surface area. SiOC-based compositions were processed from blends of three types of preceramic polymer and a catalyst, followed by curing and pyrolysis. The heating applied from the bottom of molds promoted the nucleation, expansion and rising of gas bubbles, and the...
متن کاملAC Microdischarges in Porous Ceramics
Generation of microdischarges inside porous ceramics by AC high voltage has been investigated. Electrical and optical measurements were performed to explore the physical properties of the microdischarges. The effect of pore size, discharge power and gas mixture on the discharge properties and development is described. Introduction Research of various types of non-thermal plasmas generated by el...
متن کاملAcoustics of porous materials with partially opened porosity.
A theoretical and experimental study of the acoustic properties of porous materials containing dead-end (or partially opened) porosity was recently proposed by Dupont, Leclaire, Sicot, Gong, and Panneton [J. Appl. Phys. 110, 094903 (2011)]. The present article provides a description of partially opened porosity systems and their numerous potential applications in the general context of the stud...
متن کاملProcessing and Characterization of Nanocrystalline Mica Glass-Ceramics
In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2007
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.115.52