Production Methods of Laminated Al Alloy Composites
نویسندگان
چکیده
منابع مشابه
Pilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag
In this research work, the possibility of semi industrial production of Al-TiB2 and Al-ZrB2 composites, using reactive slag in a flame furnace have been investigated. For this purpose, commercial pure aluminum and powder mixture of TiO2 (ZrO2) , KBF4 and Na3AlF6 were used. The results showed that using a proper ratio of slag forming materials as well as proper amounts of the above-mentioned com...
متن کاملPilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag
In this research work, the possibility of semi industrial production of Al-TiB2 and Al-ZrB2 composites, using reactive slag in a flame furnace have been investigated. For this purpose, commercial pure aluminum and powder mixture of TiO2 (ZrO2) , KBF4 and Na3AlF6 were used. The results showed that using a proper ratio of slag forming materials as well as proper amounts of the above-mentioned com...
متن کاملBolted Joints in Laminated Composites
Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.
متن کاملHierarchical optimization of laminated fiber reinforced composites
1. Abstract The aim of this work is to perform hierarchical optimization [1] in laminated composite structures, considering simultaneously macroscopic and microscopic levels in the design of the structure and its material. In the macroscopic level, the optimization algorithm cares with orientations and fiber volume fractions of unidirectionally reinforced composite material layers. In the micro...
متن کاملMode I Failure of Laminated Polymeric Composites
A mechanical model for the prediction of mode I delamination failure of a laminated double cantilever beam (DCB) type specimen is presented. The volume of material ahead of the crack tip that experiences high stresses due to the presence of the crack tip was replaced by a nonlinear elastic spring foundation. The volume undergoing global deformation due to the external loading was replaced by a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Current Trends in Civil & Structural Engineering
سال: 2019
ISSN: 2643-6876
DOI: 10.33552/ctcse.2019.03.000559