Production of activated carbons from coffee endocarp by CO2 and steam activation
نویسندگان
چکیده
منابع مشابه
CO2 adsorption by activated templated carbons.
Highly porous carbons have been prepared by the chemical activation of two mesoporous carbons obtained by using hexagonal- (SBA-15) and cubic (KIT-6)-ordered mesostructured silica as hard templates. These materials were investigated as sorbents for CO(2) capture. The activation process was carried out with KOH at different temperatures in the 600-800°C range. Textural characterization of these ...
متن کاملCharacterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature
Activated carbons can be produced from different precursors, including coals of different ranks, and lignocellulosic materials, by physical or chemical activation processes. The objective of this paper is to characterize oil-palm shells, as a biomass byproduct from palm-oil mills which were converted into activated carbons by nitrogen pyrolysis followed by CO2 activation. The effects of no hold...
متن کاملGranular Activated Carbons from Agricultural By-products: Process Description and Estimated Cost of Production
Acknowledgments The authors sincerely thank the seven anonymous reviewers for their valuable comments, criticism and suggestions. its technical staff is appreciated.
متن کاملProduction of Activated Carbon from Palm-oil Shell by Pyrolysis and Steam Activation in a Fixed Bed Reactor
The research objective was to produce activated carbon from palm-oil shells by one step pyrolysis and steam activation in a fixed bed reactor with the diameter of 100 mm. The studied variables were activation temperature, activation time, palm-oil shell sizes and flow rate of air. The results showed that the optimum condition was 1.18-2.36 mm of palm-oil shells at 750C for 2 hr with air flow ra...
متن کاملDeveloping almond shell-derived activated carbons as CO2 adsorbents
Two series of carbon dioxide adsorbents were prepared from almond shells, by carbonisation followed either by activation with CO2 or by heat treatment in the presence of ammonia gas (amination). Both procedures gave carbons with high CO2 adsorption capacities in pure CO2 as well as in a binary mixture of 15 % CO2 in N2. Activation with carbon dioxide significantly developed porosity in the samp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fuel Processing Technology
سال: 2008
ISSN: 0378-3820
DOI: 10.1016/j.fuproc.2007.11.030