Production of Topology-optimised Structural Nodes Using Arc-based, Additive Manufacturing with GMAW Welding Process

Monitoring of Arc Welding Process Based on Arc Light Emission

GMAW Welding Optimization Using Genetic Algorithms

/ Vol. XXVI, No. 1, January-March 2004 ABCM 28 D. S. Correia, C. V. Gonçalves, Sebastião S. C. Junior and V. A. Ferraresi Federal University of Uberlândia Faculty of Mechanical Engineering Av. João Naves de Ávila, 2.121 38400-902 Uberlândia, MG. Brazil [email protected] [email protected] [email protected] [email protected] GMAW Welding Optimization Using Genetic A...

Topology Optimization for Additive Manufacturing

This paper gives an overview of the issues and opportunities for the application of topology optimization methods for additive manufacturing (AM). The main analysis issues discussed are: how to achieve the maximum geometric resolution to allow the fine features easily manufacturable by AM to be represented in the optimization model; the manufacturing constraints to be considered, and the workfl...

Optimization of Arc Welding Process Using a Genetic Algorithm Parameters

The purpose of this study is to propose a method to decide nearoptimal settings of the welding process parameters using a genetic algorithm. This method tries to find the near-optimal settings of the welding process parameters through experiments without a model between input and output variables. It has the advantage of being able to carry out searches without modifying the design space, which...

Thermaltransport Phenomenon of Submerged Arc Welding Process

Original scientific paper In present work, thermal transport considering heat radiation by oval heat source shape and heat transfer of molten moving electrode was presented. In present paper, an analytical solution was presented by aggregating temperature increments caused by applying liquid metal and heat radiation of moving electrode. The assumptions for the study were heat source of temperat...