Properties of Water Miscible Cutting Fluids in the Cutting Process
نویسندگان
چکیده
منابع مشابه
Cutting-Tool Materials and Cutting Fluids
The reasons for the availability of a large variety of cutting-tool materials is best appreciated by reviewing the top eight parameters in the first column in Table 22.2 on p. 638. Among various factors, the type of workpiece material machined, the type of operation, and the surface finish and dimensional accuracy required all affect the choice of a cutting-tool material. For example, for inter...
متن کاملGrowth Control of Microbial in Miscible Cutting Fluids Using Ultraviolet Radiation
Considering the issues involved in industrial cutting and machining systems, and, in particular, the problems arising from the use of cutting fluids in these systems, this study presents the results of an analysis that points to a safe and efficient way to reduce contaminated microbial cutting fluids using ultraviolet radiation. The study proposes a transmitter system of simple ultraviolet radi...
متن کاملExperimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets
This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...
متن کاملWastewater Treatment of Stone Cutting Industries by Coagulation Process
Background & Aims of the Study: The wastewater created as a result of stone cutting industries enters some pools for re-consumption so that its suspended solids settle by gravity. By taking to account the high volume of water and sludge, treatment of wastewater and removal of sludge cause many problems for stone cutting units. The objective of this study was to determine the quality of wast...
متن کاملDevelopment of a Water-Jet Assisted Underwater Laser Cutting Process
We present the development of a new underwater laser cutting process in which a water-jet has been used along with the laser beam to remove the molten material through kerf. The conventional underwater laser cutting usually utilizes a high pressure gas jet along with laser beam to create a dry condition in the cutting zone and also to eject out the molten material. This causes a lot of gas bubb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Research Papers Faculty of Materials Science and Technology Slovak University of Technology
سال: 2013
ISSN: 1338-0532,1336-1589
DOI: 10.2478/v10186-012-0001-x