Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes
نویسندگان
چکیده
منابع مشابه
Characterization of Hot Bituminous-Asphalt Mixtures with Recycled Polyurethane Foam
Received: June 06, 2017 Revised: July 05, 2017 Accepted: July 19, 2017 Abstract: Introduction: The use of polymer wastes in pavement as road is an increasing trend in the road construction sector. Those new pavements reduce the amount of solid waste disposed into landfills and provide more sustainable construction due to the use of in-situ materials. Polyurethane foam waste is a thermostable po...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملAll-dielectric invisibility cloaks made of BaTiO3-loaded polyurethane foam
Transformation optics has led the way in the development of electromagnetic invisibility cloaks from science fiction to engineering practice. Invisibility cloaks have been demonstrated over a wide range of the electromagnetic spectrum, and with a variety of different fabrication techniques. However, all previous schemes have relied on the use of metamaterials consisting of arrays of sub-wavelen...
متن کاملStructural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and Magnesium Oxide board
This paper presents the structural behaviour of an emerging prefabricated wall system made up of glass fibre reinforced rigid polyurethane foam (PUF) and Magnesium Oxide (MgO) board. Full-scale wall specimens were prepared and tested under transverse bending, compression and shear. The results of the experimental investigation showed that the behaviour of the composite walls is governed by the ...
متن کاملfire behavior of rigid polyurethane foam and metal faced polyurethane sandwich panels and its fire hazard assessment
reaction to fire of fire-retarded rigid pur foams and two types of metal faced rigid polyurethane foam core sandwich panel was evaluated by using cone calorimeter test method. the tests were carried out in various radiative heat fluxes from 15 to 75 kw/m2. the radiation rate effect on reaction to fire parameters, including time to ignition (tti), peak of heat release rate (prhr), total heat rel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Cement and Concrete Composites
سال: 2008
ISSN: 0958-9465
DOI: 10.1016/j.cemconcomp.2008.06.007