Proposal of Sealing Performance Evaluation Method Using Gasket Strain in Various Sealing Tests at Room/Elevated Temperature
نویسندگان
چکیده
منابع مشابه
Structural Design and Sealing Performance Analysis of Biomimetic Sealing Ring
In order to reduce the failure probability of rubber sealing rings in reciprocating dynamic seal, a new structure of sealing ring based on bionics was designed. The biomimetic ring has three concave ridges and convex bulges on each side which are very similar to earthworms. Bulges were circularly designed and sealing performances of the biomimetic ring in both static seal and dynamic seal were ...
متن کاملModeling and experimental study on the sealing gasket of proton exchange membrane fuel cells
In this study cross section geometry and material of gasket in proton exchange membrane (PEM) fuel cells have been investigated to achieve optimized fuel cell in terms of energy efficiency. The role of gaskets in fuel cells is sealing of gas flow channels and preventing from combination of them. In a PEM stack, gasket with approved geometry that suffers more stress has better sealing. For this ...
متن کاملAirtight metallic sealing at room temperature under small mechanical pressure
Metallic seals can be resistant to air leakage, resistant to degradation under heat, and capable of carrying mechanical loads. Various technologies--such as organic solar cells and organic light emitting diodes--need, at least benefit from, such metallic seals. However, these technologies involve polymeric materials and can tolerate neither the high-temperature nor the high-pressure processes o...
متن کاملEvaluation of Apical Sealing Ability of Resilon
Background: This study was conducted to evaluate the efficiency of Resilon in achieving an adequate apical seal, and to compare it with Gutta-percha. Materials and Methods: Sixty single rooted human teeth were selected and decoronated at the cement-enamel junction. The teeth were sectioned such that 14 mm of the root length remained. Working length was established, and cleaning and shaping were...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2011
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.77.71