Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates
نویسندگان
چکیده
منابع مشابه
Failure Criterion for Two-Ply Plain-Weave CFRP Laminates
We present an experimentally-based failure criterion for symmetric two-ply plain-weave laminates of carbon-fiber reinforced plastic. The criterion is formulated in terms of six force and moment stress resultants and consists of a set of three inequalities, related to in-plane, bending, and combined in-plane and bending types of failure. All failure parameters in the criterion are measured direc...
متن کاملPost-cure shape errors of ultra-thin symmetric CFRP laminates: Effect of ply-level imperfections
This paper discusses the effect of misalignments in ply orientation, uniform variations in ply thickness, and through-thickness thermal gradients on the post-cure shape errors for symmetric cross-ply laminates constructed from ultra-thin composite materials. Photogrammetry-based surface measurements are performed for laminates cured at elevated temperatures. Significant out-of-plane shape error...
متن کاملDamage in Textile Laminates of Various Inter-ply Shift
Deformation mechanisms and failure of textile laminates are strongly affected by inter-layer configurations – a mutual shift of the plies. To model it within a traditional framework, one must construct a representative volume element (RVE), which includes all the plies. This is a time consuming and computationally expensive work. As an alternative, the paper suggests boundary conditions (BC) im...
متن کاملThe Formation and Effect of Outer-Ply Microcracks in Cross-Ply Laminates: A Variational Approach
The microcracking process in laminates which have outer-ply 90◦ plies (e.g. [90m/0n]s) has some important differences from the microcracking process in laminates which lack outer-ply 90◦ plies (e.g. [0n/90m]s). Foremost among the differences is the characteristic damage state. [90m/0n]s laminates form antisymmetric or staggered microcracks while [0n/90m]s laminates form symmetric microcracks. T...
متن کاملEffect of Ply Thickness on the Damage Development in Composite Laminates (preprint)
This paper describes the experimental investigation on the effect of ply thickness on the first ply failure, delamination, and the subsequent final failure of graphite/epoxy composite laminates. The laminates considered in this paper are a cross-ply and two quasi-isotropic laminates containing thin plies in the desired interface. The onset of the first ply failure and delamination, and the stre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2015
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2014.11.004