Pullout Resistance of Buried Anchor in Sand
نویسندگان
چکیده
منابع مشابه
Pullout Capacity of Model Piles in Sand
A large scale experimental program using vertical and batter model piles in sand subjected to pull out loads has been carried out in a model tank of size 1m x 1m x 1m. Mild steel pipes of varying diameters, lengths, and shapes are used as model piles. A poorly graded river sand having specific gravity G= 2.67, Uniformity coefficient= 3.53, emax = 0.81, emin = 0.54 has been used as foundation me...
متن کاملPullout Load Analysis of Reinforced Concrete Anchor Shafts
In this paper, results obtained in both conventional and finite element analysis of straight and belled anchor shafts subjected to a pullout force are presented. In numerical analysis, it is assumed that no drainage takes place during the anchor pullout. Comparisons between two conventional methods of analysis for ultimate pullout load and the results obtained by the finite element analysis are...
متن کاملPullout capacity of batter pile in sand
Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimat...
متن کاملInvestigation of Liquefaction Mechanism and Displacement in Buried Sand Layers
One of the most important reasons for damages during earthquakes is the liquefaction of loose and saturated sand soils. However, in many regions with proper soil specifications, the large settlements have been observed in the ground surface. Loose sand layers buried in fine soils are one of the cases which may result in these problems and as a weak point during earthquake can cause this phenome...
متن کاملHeaded Anchor/Engineered Cementitious Composites (ECC) Pullout Behavior
In this paper, the inelastic damage process in Engineered Cementitious Composites (ECC) in the high stress concentration zone adjacent to the head of an embedded anchor under tensile load was examined experimentally and numerically. An FEM model together with a tensile strain-hardening material model of ECC was developed to simulate the damage process leading to final failure. Experimental obse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soils and Foundations
سال: 1988
ISSN: 0038-0806
DOI: 10.3208/sandf1972.28.3_114