Pulse plating of tin in N,N-Dimethylformamide baths.
نویسندگان
چکیده
منابع مشابه
Application of Pulse Plating - Amorphous Alloys
Amorphous alloys can be electrodeposited by direct or pulsed current. According to electrocrystallization theory, a high crystallization overpotential produces microcrystalline structure in the deposits. Thus if the amorphous phase consists of microcrystals, pulsed current is preferable for preparing amorphous alloys. However, another newly proposed theory holds that the amorphous phase structu...
متن کاملPulse and pulse reverse plating—Conceptual, advantages and applications
A review on pulse and pulse reverse techniques for electrodeposition have been attempted. Pulse electrodeposition (PED) of some metals and lloys are reported. The effects of mass, transport, electrical double layer pulse parameters and current distribution on surface roughness and orphology are presented. Applications, advantages and disadvantages of PC and PRC techniques are discussed along wi...
متن کاملOn-Line Determination of Succinate Anion in Zinc Plating Baths: A Comparison of Methods
rocess and quality control are exP tremely important in achieving optimum production and they have a special place in continuously operating processes. Real-time process monitoring is the comerstone of maintaining an efficient electroplating process. For the steel industry, zinc and nickel electroplating processes used for anticorrosion treatmentl must be monitored to maintain certain standards...
متن کاملProlonging the Life of Electroless Nickel Plating Baths by Phosphite Removal
Electroless nickel plating baths have to be discarded when levels of phosphites build up and interfere with the plating process. OWMC funded research conducted at ORTECH International to determine whether phosphites could be removed from plating bath solution. The first attempt to do this by adsorption on flyash was unsuccessful. However, the use of calcium ion to precipitate calcium phosphite ...
متن کاملPulse reverse plating for uniform nickel height in zone plates
Nickel soft x-ray zone plates are fabricated by through-mask electroplating. The authors report on how a uniform nickel thickness can be obtained over the entire zone plate using pulse and pulse reverse plating. If the plating is carried out at a constant current the nickel thickness has been observed to decrease with radius. This results in lower outer zones and reduced diffraction efficiency ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1988
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.39.214