Pulsed Electric-Current Bonding of SiC to Cu with Ti Intermediate Layer
نویسندگان
چکیده
منابع مشابه
Corrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys
A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...
متن کاملSpiral superconducting Nb-Ti filaments: electric field and critical current
As a first step to a better understanding of the voltage-current characteristics of fine filament multifi lamentary composite superconductors, the electric field and critical current along a single spiral-shaped fi lament were studied. When the spiral superconducting filament was carrying constant current and placed in a magnetic field, the local critical current and electric field vary due to ...
متن کاملHigh Reliable Cu Damascene Interconnects with Cu/Ti/TiN/Ti Layered Structure
We studied the effect of inserting a Ti layer between the Cu and TiN layers on the interconnect resistance and on the resistance toward electromigration (EM) of the damascene interconnects. As a result, it became clear that, by inserting the Ti layer, the adhesion of the Cu to the underlayer could be improved. By inserting the thin Ti layer with atmospheric exposure, we were able to hold down t...
متن کاملCryosurgery with Pulsed Electric Fields
This study explores the hypothesis that combining the minimally invasive surgical techniques of cryosurgery and pulsed electric fields will eliminate some of the major disadvantages of these techniques while retaining their advantages. Cryosurgery, tissue ablation by freezing, is a well-established minimally invasive surgical technique. One disadvantage of cryosurgery concerns the mechanism of ...
متن کاملElectric field in SPS: geometry and pulsed current effects
Electrical heating of the graphite die and punch assembly is a unique feature of the spark plasma sintering (SPS) process. The high currents needed to heat the die, despite its low resistance, can produce an electric field across the ceramic specimens that may be enough to induce field assisted sintering. Despite the large number of publications of SPS, the electric field intensity has not been...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2003
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.67.9_432