Pure perovskite BiFeO3–BaTiO3 ceramics prepared by reaction flash sintering of Bi2O3–Fe2O3–BaTiO3 mixed powders

Perovskite solar cells prepared by flash evaporation.

A simple vacuum deposition method for the preparation of high quality hybrid organic-inorganic methylammonium lead iodide perovskite thin films is reported. When sandwiched in between organic charge transporting layers, such films lead to solar cells with a power conversion efficiency of 12.2%.

On the Mechanism of Microwave Flash Sintering of Ceramics

The results of a study of ultra-rapid (flash) sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10-500 W/cm³) are presented. Ceramic samples of various compositions-Al₂O₃; Y₂O₃; MgAl₂O₄; and Yb(LaO)₂O₃-were sintered using a 24 GHz gyrotron system to a density above 0.98-0.99 of the theoretical value in 0.5-5 min without isothermal...

Preparation of translucent YAG:Ce ceramics by reaction sintering

The paper presents preparation of YAG precursor powders mixture with ability for the reaction sintering at lower temperature. The powder mixture was mechanochemically processed and characterized for the specific surface area and crystallinity (XRD). Sintering experiments were performed on the batched powders, mechanochemically processed powders and as-synthesised YAG powders. XRD measurements a...

Sintering properties of hydroxyapatite powders prepared using different methods

In the present work, the sintering behaviour of HA particles prepared via the wet precipitation method (HAp) and wet mechanochemical technique (HAwm) was investigated. The sintering behaviour of a commercial HA powder (HAc) was also studied for comparison purpose. All the three powders were characterised in terms of particle size, Ca/P ratio and crystal size. Green samples were prepared and sin...

Sintering of Zircon Powders