Pyrolysis Kinetics of Pine Sawdust in a Fixed Bed
نویسندگان
چکیده
منابع مشابه
Pressurised pyrolysis of Miscanthus using a fixed bed reactor.
Miscanthus x giganteus was pyrolysed, in a fixed bed reactor in a constant flow of dinitrogen gas, at a rate of 13°C/min from ambient to 550°C, then held for 25 min at this temperature. The pressures employed ranged from atmospheric to 26 bar. The major compounds identified in the bio-oil were water, phenol, and phenol derivatives. The water contents impact on the usefulness of the bio-oil as a...
متن کاملProperties of Gas and Char from Microwave Pyrolysis of Pine Sawdust
Pine sawdust pyrolysis was carried out respectively using microwave and conventional electrical heating at different temperatures in order to understand the properties of pyrolytic products from microwave pyrolysis of biomass. Less char material was obtained by microwave pyrolysis compared to conventional heating at the same temperature. While comparing the components of the pyrolytic gases, it...
متن کاملA Novel Energy-Efficient Pyrolysis Process: Self-pyrolysis of Oil Shale Triggered by Topochemical Heat in a Horizontal Fixed Bed
This paper proposes a novel energy-efficient oil shale pyrolysis process triggered by a topochemical reaction that can be applied in horizontal oil shale formations. The process starts by feeding preheated air to oil shale to initiate a topochemical reaction and the onset of self-pyrolysis. As the temperature in the virgin oil shale increases (to 250-300°C), the hot air can be replaced by ambie...
متن کاملDetailed kinetics in the mathematical model of fixed bed gasifiers
This work presents a general mathematical model of a fixed bed gasifier, where both the transport resistances and the chemical kinetics are important at the reactor and the particle scale. Pyrolysis and gasification of the solid fuel (coal, plastics, biomasses or wastes) is only the first step of the whole process. Successive gas phase reactions of the released species are described with a deta...
متن کاملExperimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column
In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodicals of Engineering and Natural Sciences (PEN)
سال: 2017
ISSN: 2303-4521
DOI: 10.21533/pen.v5i1.80