Quantitative electron microprobe analysis of thin alloy films on substrates based on Gaussian ionization Distribution models.
نویسندگان
چکیده
منابع مشابه
High Coercivity Co-Alloy Thin Films on Polymer Substrates
Films of (10 10) textured CoCrPt have been sputtered on polymer substrates for use as thin film tape media. Underlayers of NiAl combined with various intermediate layers were employed to obtain this orientation without thermal damage to the polymer. It was found that NiAl underlayers sputtered on tape substrates have a (112) growth texture, like they do on glass. Film coercivity varied as a fun...
متن کاملQuantitative Analysis of Electron Beam Damage in Organic Thin Films
In transmission electron microscopy (TEM) the interaction of an electron beam with polymers such as P3HT:PCBM photovoltaic nanocomposites results in electron beam damage, which is the most important factor limiting acquisition of structural or chemical data at high spatial resolution. Beam effects can vary depending on parameters such as electron dose rate, temperature during imaging, and the p...
متن کاملNanocrystalline silicon thin films on PEN substrates
We study the structural and electrical properties of intrinsic layers growth close to the transition between amorphous silicon (a-Si:H) and nanocrystalline silicon (nc-Si:H) deposited on glass and PEN without intentional heating. These samples showed different behaviour in Raman shift and XRD spectra when compared with that of samples deposited at 200oC. Electrical properties of these films als...
متن کاملStudy of Iridium (Ir) Thin Films Deposited on to SiO2 Substrates
Very smooth thin films of iridium have been deposited on super polished fused silica (SiO2) substrates using dc magnetron sputtering in argon plasma. The influence of deposition process parameters on film micro roughness has been investigated. In addition, film optical constants have been determined using variable angle spectroscopic ellipsometery, over the spectra range from vacuum ultraviolet...
متن کاملExperimental Analysis on the Molten-Phase Dewetting Characteristics of AuPd Alloy Films on Topographically-Structured Substrates
AuPd nanoparticles are formed on fluorine-doped tin oxide (FTO) by a nanosecond laser irradiation-induced dewetting process of deposited AuPd films. In particular, we analyze the effect of the surface topography of the substrate on the dewetting process and, so, on the final mean size of the formed nanoparticles. In fact, we used two supporting FTO substrates differing in the surface topography...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1991
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.40.12_917