Railway wheel squeal. Squeal of a rotating disk.
نویسندگان
چکیده
منابع مشابه
Experimental and theoretical investigation of railway wheel squeal
The tangential contact forces that arise at the interface between the wheel of a railway vehicle and the rail provide all the traction, braking, and guidance required by the vehicle. These forces are the result of microslip or creepage and can become unstable exciting vibration of the wheel, particularly at frequencies corresponding to the wheel’s axial (and radial) modes. Although theories exi...
متن کاملRail Wheel Squeal – Some Causes and a Case Study of Freight-car Wheel Squeal Reduction
Rail wheel squeal on curves in rail track is a source of potential noise annoyance to residents adjacent to rail lines. For one private rail freight operator, wheel squeal was causing repeated complaints from neighbours. Wheel squeal can be caused by the wheel-tyre to rail-top interaction and the wheel flange interaction with the gauge face of the rail (more like a screech). This paper describe...
متن کاملDisk brake squeal prediction using the ABLE algorithm
Disk brake squeal noise is mainly due to unstable friction-induced vibration. A typical disk brake system includes two pads, a rotor, a caliper and a piston. In order to predict if a disk brake system will generate squeal, the finite element method (FEM) is used to simulate the system. At the contact interfaces between the pads and the rotor, the normal displacement is continuous and Coulomb’s ...
متن کاملShape Optimization for Brake Squeal
1. Abstract The present paper describes a solution to a non-parametric shape optimization problem of a brake model suppressing squeal noise. The brake model consists of a rotor and a pad between which the Coulomb friction occurs. A main problem is defined as a complex eigenvalue problem of the brake model obtained from the equation of motion. As an objective cost function, we use the positive r...
متن کاملExperimental analysis on squeal modal instability
In this paper, an experimental analysis performed on a simplified brake apparatus is presented. Brake squeal is a major concern in braking design. During past years a common approach for squeal prediction was the complex eigenvalues analysis. Squeal phenomenon is treated like a dynamic instability. When two modes of the brake system couple at the same frequency, one of them becomes unstable lea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
سال: 1989
ISSN: 0914-8825
DOI: 10.1299/jsmec1988.32.406