RANCANG BANGUN KONSTRUKSI RANGKA MESIN 3D PRINTER TIPE CARTESIAN BERBASIS FUSED DEPOSITION MODELING (FDM)
نویسندگان
چکیده
منابع مشابه
Study on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality
3D printing known as additive manufacturing (AM) has been applied for applications in different fields such as aerospace, automotive, biomedical, and energy industries. It is the fact that 3D printing has gained a very wide acceptance over the last decade. However, several significant hurdles prevent its wider adoption. One of the most important barriers is the quality of the printed parts. Cur...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کامل3D-Printing Plates without “Support”
When printing a plate (or dish) by an FDM 3D printer, the process normally requires support material, which causes several problems. This paper proposes a method for forming thin plates without using wasteful support material. This method requires several extraordinary parameter values when slicing plates. The experiments show that the plates can, for the most part, be successfully formed using...
متن کاملComparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Polyetherimide (PEI) blends modified by either polycarbonate (PC) or polyethylene terephthalate glycol-modified (PETG) were prepared. The latter modifier (PETG) was an industrial grade widely used for fused deposition modelling (FDM) printing. PEI blends were compared to Ultem 9085, which is the standard PEI grade for FDM printing in advanced applications. All the blends were thoroughly charact...
متن کاملOptimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique
Fused deposition modelling (FDM) is a fast growing rapid prototyping (RP) technology due to its ability to build functional parts having complex geometrical shapes in reasonable build time. The dimensional accuracy, surface roughness, mechanical strength and above all functionality of built parts are dependent on many process variables and their settings. In this study, five important process p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jurnal Teknik Mesin
سال: 2017
ISSN: 2549-2888,2089-7235
DOI: 10.22441/jtm.v6i4.2075