Rapid Carburizing Process (1st Report) Solid Carbonitriding of Steel
نویسندگان
چکیده
منابع مشابه
Carbonitriding – fundamentals, modeling and process optimization
The carbonitriding process, which involves the diffusion of both carbon and nitrogen into the base steel, can be carried out in a salt bath or in a furnace gas atmosphere. It is a modified carburizing process but is mostly done at a lower temperature and for shorter time than carburizing. This process is one of the widely used heat treatments for surface hardening. Nonetheless, there are challe...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملCutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools
In the present study, an attempt has been made to experimentally investigate the effects of cutting parameters on cutting force in end milling of AISI 304 steel with solid carbide tools. Experiments were conducted based on four factors and five level central composite rotatable design. Mathematical model has been developed to predict the cutting forces in terms of cutting parameters such as he...
متن کاملPancreas Transplantation and Report of 1st one in IRAN
SUMMARY Since 1923, the type I diabetic patients are treating with injections of insulin. Mortality of these patients decreased, comparing with noninsulin using patients, but many of them developed complications of diabetes mellitus, like nephropathy, retinopathy and neuropathy. The choice for treating this diseas and preventing its complications is pancrease transplantation, The 1st pancreas...
متن کاملGas and Vacuum Carburizing
The solution algorithm used in CarbTool is based on the finite difference method (FDM), and the code is developed using Microsoft Visual C++ in Window OS. The tool has been built on the concept of the carbon flux at the surface between the gas and steel is to be specified by the user. The outputs of CarbTool are the carbon concentration distribution profile inside the steel part and the surfa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1952
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.16.5_281