Rapid determination of titanium in stainless steel and heat-resistant alloy by the polarographic method
نویسندگان
چکیده
منابع مشابه
Comparative MRI compatibility of 316 L stainless steel alloy and nickel-titanium alloy stents.
The initial success of coronary stenting is leading to a proliferation in peripheral stenting. A significant portion of the stents used in a clinical setting are made of 316 low carbon stainless steel (SS). Other alloys that have been used for stent manufacture include tantalum, MP35N, and nickel-titanium (NiTi). The ferromagnetic properties of SS cause the production of artifacts in magnetic r...
متن کاملVacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
Both Zirconium-based alloys and 321stainless steel are widely used as engineering alloys due to their good mechanical properties. Conventional fusion welding techniques for Zr alloys and stainless steel are not feasible due to the formation of brittle intermetallic compounds such as (Zr3Fe, ZrFe2 and Zr2Fe) and corrosion cracking. Brazing is one of the most wide...
متن کاملCorrosion resistance of stainless steel, nickel-titanium, titanium molybdenum alloy, and ion-implanted titanium molybdenum alloy archwires in acidic fluoride-containing artificial saliva: An in vitro study
OBJECTIVE (1) To evaluate the corrosion resistance of four different orthodontic archwires and to determine the effect of 0.5% NaF (simulating high fluoride-containing toothpaste of about 2250 ppm) on corrosion resistance of these archwires. (2) To assess whether surface roughness (Ra) is the primary factor influencing the corrosion resistance of these archwires. MATERIALS AND METHODS Four di...
متن کاملComparison of spring characteristics of titanium-molybdenum alloy and stainless steel
BACKGROUND Titanium-molybdenum alloy (TMA) and stainless steel (SS) wires are commonly used in orthodontics as arch-wires for tooth movement. However, plastic deformation phenomenon in these arch-wires seems to be a major concern among orthodontists. This study aimed to compare the mechanical properties of TMA and SS wires with different dimensions. MATERIAL AND METHODS Seventy-two wire sampl...
متن کاملPhotocatalytic reactivity of the titanium oxide loaded on a stainless steel screen by a spraying method
To reduce a film-diffusional resistance in the very vicinity of the photocatalyst surface, titanium oxide particles containing a small amount of adsorbent particles (310 %) are immobilized on a stainless steel screen by a spraying method and its performance is investigated by decomposing 2,4-dinitrophenol in water. It is found that the activity of this photocatalyst screen is higher than that o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 1962
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.11.312