Rayleigh angle incident ultrasonic beam shape design influence on reflected beam

نویسندگان

چکیده

Current evolutions in transducer design, such as phased arrays, but more importantly, metamaterials-based acoustic lenses, potentially enable generating specific beam shapes earlier unconsidered. It is known that the Schoch effect, when a bounded incident on submerged solid reflects at Rayleigh angle, depends width and frequency. This work numerically explores consequence of shape beams effect invites further experimental work. The study investigates square with exponential flanks compared to Gaussian reference profiles incorporates diffraction upon sound propagation resemble reality better. shown stunning differences occur depending shape, particularly for beams.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrasonic beam models for the generation of surface waves and plate waves with angle beam transducers

A new transducer beam model is developed for the generation of Rayleigh surface wave and Lamb plate waves by an angle beam transducer, which is one of the configurations commonly used for the generation of these wave types. The beam model is a fully 3-D model that takes into account the fields generated by the transducer acting on the surface of a wedge. The model also accounts for the leaky wa...

متن کامل

Altitude measurement using laser beam reflected from water surface

In this paper altitude measurement from water surface using laser beam is presented. Research data indicate that the reflection of infrared waves from water surface is about zero and it is less than 2% for visible radiations. Phase-shift and heterodyne technique was used for the measurement, and the laser beam ( mW p nm 10 , 700 = = l ) was modulated by a sine wave having a fixed frequency....

متن کامل

Measurement of Rayleigh Wave Beams Using Angle Beam Wedge Transducers as the Transmitter and Receiver with Consideration of Beam Spreading

A theoretical model, along with experimental verification, is developed to describe the generation, propagation and reception of a Rayleigh wave using angle beam wedge transducers. The Rayleigh wave generation process using an angle beam wedge transducer is analyzed, and the actual Rayleigh wave sound source distributions are evaluated numerically. Based on the reciprocity theorem and consideri...

متن کامل

Rf Cavity Bpm's as Beam Angle and Beam Correlation Monitors*

It has been shown that high performance cavity BPM's are capable of accurate beam trajectory angle and beam ‘tilt’, (x-z or y-z correlation) measurements [1],[2]. Such a device will be very useful for the optimization of a variety of beamlines, such as high current linacs, bunch rotators and storage rings. The signal from a non-axial trajectory or a tilted beam is in quadrature to that observed...

متن کامل

Single beam interferometric angle measurement

We present a new application of the Nomarski interferometer, to measure the angular position of a parallel laser beam with interfero-metric precision. In our experimental realization we reach a resolution of 3 × 10 −9 rad (6 × 10 −4 ′′) for 1 kHz bandwidth in a 2 × 10 −2 rad (1 •) range. This alternative to the optical lever technique features absolute calibration, independence of the sensitivi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Acta acustica

سال: 2023

ISSN: ['2681-4617']

DOI: https://doi.org/10.1051/aacus/2023037