Reactive ion etching of dielectrics and silicon for photovoltaic applications
نویسندگان
چکیده
منابع مشابه
Reactive Ion Etching of Dielectrics and Silicon for Photovoltaic Applications
Reactive Ion Etching of Dielectrics and Silicon for Photovoltaic Applications Prakash N. K. Deenapanray1*,y, C. S. Athukorala, Daniel Macdonald, W. E. Jellett, E. Franklin, V. E. Everett, K. J. Weber and A. W. Blakers Centre for Sustainable Energy Systems, FEIT, The Australian National University, Canberra ACT 0200, Australia Department of Engineering, FEIT, The Australian National University, ...
متن کاملCryogenic Deep Reactive Ion Etching of Silicon Micro and Nanostructures
OF DOCTORAL DISSERTATION HELSINKI UNIVERSITY OF TECHNOLOGY P.O. BOX 1000, FI-02015 TKK
متن کاملReactive ion etching of quartz and Pyrex for microelectronic applications
The reactive ion etching of quartz and Pyrex substrates was carried out using CF4 /Ar and CF4 /O2 gas mixtures in a combined radio frequency ~rf!/microwave ~mw! plasma. It was observed that the etch rate and the surface morphology of the etched regions depended on the gas mixture ~CF4 /Ar or CF4 /O2), the relative concentration of CF4 in the gas mixture, the rf power ~and the associated self-in...
متن کاملReactive ion etching
The reactive ion etching ofInP, InGaAs, and InAIAs in CClzF2/02 or C2R(/H2 discharges was investigated as a function of the plasma parameters pressure, power density, flow rate, and relative composition. The etch rates of these materials are a factor of 3-5 X faster in CC12F 2/0 2 (-600--1000 AminJ ) compared to CzHJH2 (160-320 AminI ). Significantly smoother morphologies are obtained with C2H6...
متن کاملInvestigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications
Porous silicon was successfully prepared using metal-assisted chemical etching method. The Effect of HF/H2O2 concentration in etching solution as an affecting parameter on the prepared porosity type and size was investigated. Field emission electron microscopy (FE-SEM) confirmed that all etched samples had porous structure and the sample which was immersed into HF/H2O2 withmolar ratio of 7/3.53...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Photovoltaics: Research and Applications
سال: 2006
ISSN: 1062-7995,1099-159X
DOI: 10.1002/pip.684