Reaming of carbon fibre reinforced plastics: Influence of tool geometry on process forces and tool wear
نویسندگان
چکیده
منابع مشابه
Wear of ceramic-on-carbon fibre reinforced PEEK hip replacements
Total hip replacement has been a successful surgical intervention for many years. However, concerns regarding UHMWPE wear particle induced osteolysis [1], have led to alternative bearing materials to be sought. Carbon-fibre reinforced poly-ether-ether-ketone (CFR-PEEK) is a fibre-reinforced polymer which has shown reduced wear in hip and knee configurations compared with conventional polyethyle...
متن کاملJoining of Carbon Fibre Reinforced Plastics for Automotive Applications
The introduction of carbon-fibre reinforced plastics in load bearing automotive structures provides a great potential to reduce vehicle weight and fuel consumption. To enable the manufacture and assembly of composite structural parts, reliable and cost-effective joining technologies must be developed. This thesis addresses several aspects of joining and load introduction in carbon-fibre reinfor...
متن کاملSome observations in grinding unidirectional carbon fibre-reinforced plastics
This paper investigates the grinding performance of epoxy matrix composites reinforced by unidirectional carbon fibres, using an alumina grinding wheel. Emphasis was placed on understanding the effect of fibre orientations and grinding depths on the grinding force and surface integrity, and on understanding the grinding mechanisms, with a comparison to orthogonal cutting. It was found that grea...
متن کاملDrilling of Fiber-Reinforced Plastics - Tool Modeling and Defect Prediction
Fiber reinforced polymer (FRP) composites have been steadily replacing metals as choice engineering materials for various applications. Although FRPs can be manufactured to near-net shape, post processing operations such as machining are required to create some features (such as holes). In order to drill holes efficiently with the least waste and defects, it is essential to understand the machi...
متن کاملTool Geometry Evaluation for Carbon Reinforced Composite Laminates
SUMMARY The use of composite laminates in complex structures has increased significantly. However, there are still some issues when considering their use, mainly related with machining, leading to some difficulties and lack of acceptance. In this work, a methodology to evaluate drill geometry and feed rate based on thrust force and delamination extension is presented. INTRODUCTION For the past ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2021
ISSN: 2212-8271
DOI: 10.1016/j.procir.2021.03.058