Recovery process of waste ternary battery cathode material
نویسندگان
چکیده
LIBs is a kind of energy storage device, which has the advantages high density, no memory effect, good safety performance, and many cycles; It widely used in scientific technological fields at home abroad. With large-scale increase use lithium-ion batteries, amount scrap also increased. In order to better realize resource recovery, conservation emission reduction, it necessary study series new technologies for waste battery recovery; This review mainly introduces recovery process cathode material (LiNixCoyMn1-x-yO2) ternary battery, carries out recovery. The content describes three major links recycling process. first link pretreatment batteries. second analyzes current methods materials After analyzing disadvantages each method, wet introduced detail. most commonly way batteries this stage. last regeneration materials.
منابع مشابه
Micrometric Growth of V2O5Hexagonal Nano-plates as an Active Material for Lithium Ion Battery Cathode Electrode
This manuscript reports the synthesis of V2O5 nanostructures using reflux method, without using additives such as surface reactants. The influence of reaction parameters like temperature and concentration on the growth of nanostructures have been investigated. It has been observed that the nanostructures are formed with a hexagonal nano-plate morphology, grown from a common core. The diameter o...
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملThe effect of B4C addition to MnO2 in a cathode material for battery applications
Boron carbide (B4C) added manganese dioxide (MnO2) used as a cathode material for a Zn–MnO2 battery using aqueous lithium hydroxide (LiOH) as the electrolyte is known to have higher discharge capacity but with a lower average discharge voltage than pure MnO2 (additive free). The performance is reversed when using potassium hydroxide (KOH) as the electrolyte. Herein, the MnO2 was mixed with 0, 5...
متن کاملSynthesis and electrochemical performance of LiV 3O 8/polyaniline as cathode material for the lithium battery
LiV3O8-polyaniline nanocomposites have been synthesized via chemical oxidative polymerization directed by the anionic surfactant sodium dodecyl benzene sulfate. The polyaniline particles are uniformly coated on the LiV3O8 nanorods. The composite with 12 wt. % polyaniline retains a discharge capacity of 204 mAh g after 100 cycles and had better rate capability (175 mAh g at 2 C and 145 mAh g at ...
متن کاملVanadium Oxide/Graphene Nanoplatelet as a Cathode Material for Mg-Ion Battery
The aim of the present work is to introduce a high performance cathode for magnesium-ion batteries. A simple ball mill process is employed to synthesize (V2O5)1−x (Graphene Nanoplatelets (GNP))x nanocomposite, (where x = 0, 5, 10, 15, 20 and 25 wt.% GNP). The synthesized samples are characterized using scanning electron microscope (SEM), X-ray diffraction (XRD) technique, impedance spectroscopy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2023
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202339401004