Recrystallisation of Ti IF Steel Investigated with Electron Back-scattering Pattern (EBSP).

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel

An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...

متن کامل

Influence of Phosphorus Micro-Segregation on Ferrite Structure in Cast Strips of 0.1mass% C Steel

Cast strips of 0.1mass% C steel with or without phosphorus addition have been characterized by electron back-scattering diffraction pattern (EBSP) measurements. Then the formation of globular ferrite structure was discussed. EBSP analysis combined with optical microscopy clearly showed that a globular grain was fitted to be an -ferrite grain. The EBSP analysis suggested that the retainedgrain g...

متن کامل

Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map

Processing map for hot working of Ti-IF steel has been developed in the temperature range of 750 to 1100 °C and strain rate of 0.01 to 100 s-1. This map in the austenite region exhibits a single domain with a peak efficiency of 45% occurring at 1025 °C and strain rate of 0.02 s-1. The domain extends over the temperature range of 1000 to 1100 °C and strain rate range of 0.01 to 1 s-1. The true s...

متن کامل

optimization of hot workability in ti-if steel by using the processing map

processing map for hot working of ti-if steel has been developed in the temperature range of 750 to 1100 °cand strain rate of 0.01 to 100 s-1. this map in the austenite region exhibits a single domain with a peak efficiencyof 45% occurring at 1025 °c and strain rate of 0.02 s-1. the domain extends over the temperature range of 1000to 1100 °c and strain rate range of 0.01 to 1 s-1. the true stre...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: ISIJ International

سال: 1996

ISSN: 0915-1559

DOI: 10.2355/isijinternational.36.1046