RECYCLING PROCESS OF U3O8 POWDER IN MnO-Al2O3 DOPED LARGE GRAIN UO2 PELLETS

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermophysical and Mechanical Analyses of UO2-36.4vol % BeO Fuel Pellets with Zircaloy, SiC, and FeCrAl Claddings

The thermophysical performance and solid mechanics behavior of UO2-36.4vol % BeO fuel pellets cladded with Zircaloy, SiC, and FeCrAl, and Zircaloy cladding materials coated with SiC and FeCrAl, are investigated based on simulation results obtained by the CAMPUS code. In addition, the effect of coating thickness (0.5, 1 and 1.5 mm) on fuel performance and mechanical interaction is discussed. The...

متن کامل

MgO Doped Carbon Nanotube-reinforced Al2O3 Nanocomposite

Carbon nanotubes (CNTs) are probably the strongest material ever known with outstanding mechanical, electrical and physical properties [1, 2]. It is postulated that by transferring these fabulous properties as reinforcements in inorganic matrices, a new class of nanocomposite to meet the requirement of advanced applications will be generated. Al2O3 ceramics have been widely used for structural,...

متن کامل

Recycling of Cu powder from industrial sludge by combined acid leaching, chemical exchange and ferrite process.

A method in combination of acid leaching, chemical exchange and ferrite process was applied to recycle copper and confer higher chemical stability to the sludge generated from etching process in printed circuit board industry. Ninety-five percent copper could be recycled in the form of powder from the sludge. Moreover, not only the wastewater after chemical exchange can be treated to fulfill th...

متن کامل

Reoxidation Rate of Sponge Iron Pellets, Briquettes and Iron Powder Compressed to Various Compressions in Air

The reoxidation rate of sponge iron pellets and briquettes and oxidation of pure iron powder with compressibility between 27% and 55% in air and within the temperature range 300-900°C has been investigated. Factors affecting the oxidation rate are presented. These include the effect of temperature, compressibility, and sintering of Fe-powder before and during the oxidation.

متن کامل

Effect of Different Heating Process on the Photoluminescence Properties of Perovskite Eu-Doped BaZrO3 Powder

In this study, BaZrO3:Eu0.025 powder was synthesized through the solid-state reaction method with two different heating processes. For the one-step process, the BaZrO3:Eu0.025 powder was heated to 1000 ̋C–1400 ̋C for 2 h. For the two-step heating process, the BaZrO3:Eu0.025 powder was pre-heated at 800 ̋C for 2 h, after being cooled to room temperature and ground, then the powder was heated to ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Nuclear Engineering and Technology

سال: 2014

ISSN: 1738-5733

DOI: 10.5516/net.07.2013.043